NOTE: This product cannot be shipped to CA, CO and New York City, NY due to their 1.8 gallons per minute flow restriction.

Aqua Rain Shower System - 1019

Warranty

Backed by a Manufacturer's lifetime limited warranty ~ Click here for complete details

Quick Look

The AquaRain Shower System from PULSE ShowerSpas replaces your existing showerhead with an oversized rain showerhead, adjustable slide bar with soap dish, and multi-function handshower. The integrated dual-function diverter allows you to use each function independently or in tandem. Typical install is less than 1 hour—even for the do it yourselfer. It simply connects to the water supply at your existing showerhead location and uses your existing hot/cold shower valve.

THIS SHOWER SYSTEM DOES NOT INCLUDE A MIXING VALVE. PLEASE REFER TO THE TRU-TEMP VALVE, MODEL #3001-RIV-PB

Features

• Surface mounted and completely pre-plumbed, easily retrofit your existing shower without a remodel
• All brass construction in chrome finish
• 8" Rain showerhead with soft tips to clear mineral buildup for long lasting performance
• Five-function handshower with 59" double-interlocking stainless steel hose
• Rub tips clean with Spray Straight™ technology
• Slide bar adjusts height of handshower and soap dish
• Brass diverter easily switches functions—place between functions for further enjoyment
• Simply replaces your existing showerhead/shower arm

Specs

• Backflow protection in the handshower hose

• ½" NPT Brass nipple connector

• Flow rate: 2.5 GPM/9.5 LPM Shower System

Dimensions

• Product Height (inches): 28

• Product Width (inches): 8.5

• Product Depth (inches): 25

• Product Weight (lbs.): 7

• Product Size (inches): 28"H x 8.5"W x 25"D

• Shipping Length (inches): 29

• Shipping Width (inches): 11

• Shipping Height (inches): 5

• Shipping Weight (lbs.): 10

• Box Size(inches): 29"L x 11"W x 5"H

FAQs

Possible to have the overhead rain shower and hand held water both flowing at same time?

Yes, it is possible. There is a mixing valve on the shower that allows you to vary the amount of water going to each head. Naturally, you need to have sufficient water pressure.

I have separate hot and cold handles. Will it connect to separate hot and cold handles or only with a single handle valve?

You use the existing valves. The only change is to the showerhead and add the pole to the wall. It is basically adding a dual head unit to an existing valve.

What holds the bar for the handheld and soap dish?

It needs to be screwed into the wall.

You won't find a better price, we guarantee it!